UniversalFlamingo 1w ago • 100%
I have two. You can borrow one for a while.
UniversalFlamingo 2mo ago • 93%
I wish I could upvote this twice.
UniversalFlamingo 3mo ago • 100%
I feel this.
UniversalFlamingo 3mo ago • 100%
This is a great watch: https://youtube.com/playlist?list=PLowKtXNTBypGqImE405J2565dvjafglHU&si=f-jWdjiFCkVjmgDH
UniversalFlamingo 3mo ago • 100%
Thursdays. I never did get the hang of Thursdays.
UniversalFlamingo 5mo ago • 100%
I wish I could upvote this twice.
UniversalFlamingo 5mo ago • 93%
tar czf thing.tgz things/
tar xzf thing.tgz
UniversalFlamingo 9mo ago • 100%
Damnit...
UniversalFlamingo 9mo ago • 100%
Update: I wasn't able to fiddle with it for a few days but after getting back to it have something I like.
My current settings are based on the feedback in this thread and:
z-offset made the single biggest difference. I reset the printer config and re-leveled.
For this filament: https://www.amazon.com/Inland-1-75mm-White-Printer-Filament/dp/B084RDMG7C/
Global Settings
Layer Height 0.20
Initial Layer H... 0.20
Wall Thickness 0.80
Top/Bottom T... 0.80
Combing Mode infill
Build Plate Adh... brim
Extruder
Wall Line Count 3
Print Thin Walls True
Travel Speed 110
Initial Layer Sp... 20
Retraction Dist... 0.8
Retraction Speed 45
Minimum Extru... 1
Brim Width 4
Filament Print Settings:
Default Printing Temperature 210
Default Build Plate Temperature 60
Standby Temperature 195
Fan Speed 100
UniversalFlamingo 9mo ago • 100%
I printed a tower a few days ago and it looks good anywhere from 200 to 215. I'm going to keep trying though.
UniversalFlamingo 9mo ago • 100%
z offset / nozzle height seems to be the thing. I've raised it up and it looks better. After that I played with the temp a bit and it seems to be happier around 210-215 though there is more stringing.
So far, all attempts at ironing have been a disaster, both zig zag and concentric. I'm going to continue dialing in the z offset and temp before ironing.
UniversalFlamingo 9mo ago • 100%
Weird. I couldn't post the original pic but a screenshot of it seems to work.
The spool doesn't say "silk" but the sticker does say print temp 215-230: https://www.amazon.com/Inland-1-75mm-White-Printer-Filament/dp/B084RDMG7C/ I'll give that a shot & see if it looks any better.
This is layer 2 or 3. It will be covered by the next few layers but I feel like it shouldn't be this fugly. I'm using Cura's Standard Quality except for temp which is set to 205. The filament is Inland PLA.
I have a Zoom65v2 that's almost perfect but doesn't support QMK so I've been shopping around and wanted to get the community's opinions before making a decision. My criteria: - size: 60-65% - firmware: QMK - layout standard: ansi - layout ergonomics: normal - hot-swappable: required, my soldering days are behind me - per-key RGB (QMK rgb_matrix) is a must have - underlighting (QMK rgblight) would be a plus The kprepublic bm60/bm68 and Tofu 60/65 (2.0) are currently at the top of my list. I have a bm40 that I could only love more if it had more code space. (I'm selling the Zoom65v2 if anyone is interested.)
UniversalFlamingo 1y ago • 100%
Wow. That brings back memories!
UniversalFlamingo 1y ago • 85%
I have heard that when cars were a rare thing in the Old West that drivers had to stop at intersections, get out, and fire a gun to warn any horse-powered cross traffic. It sounds like total bs but there have been stranger laws...
UniversalFlamingo 1y ago • 100%
Yeah, I like it. I'll be playing with the acoustics for a while to get the sound I want. The wireless is solid, no drops or other headaches. I had an issue with it loosing my custom config a couple of times on the default firmware but not since flashing the latest. My chief complaint is that it doesn't support qmk. I'm not clear on why, though, since it supports Via and I thought qmk was a prerequisite for it.
UniversalFlamingo 1y ago • 100%
I've got some coming in from Ali along with a couple of others that were mentioned. They won't arrive for a bit though.
UniversalFlamingo 1y ago • 100%
Thanks for summarizing. That guy has a ton of videos!
UniversalFlamingo 1y ago • 100%
Hmm... I have gateron blues in my Keychron but they're not hot-swap. I may pickup a 10 pack of the Cherry's to test.
UniversalFlamingo 1y ago • 100%
Thanks for the tip. I'll research that asap.
I just finished my Zoom65 V2 with kailh box jades and cheap Amazon caps. The sound is ok but I want something "deeper" and louder from the alpha keys. What do y'all suggest? Pulling out the foam in the bottom of the case and underside of the PCB definitely helped. I've done the tape mod and plan to do the holee mod when I open it up again.
Kinda the only thing I miss about reddit TBH.